Linksys AC1900 Manual Del Usuario página 7

2. Wait for the indicator LED
going to step 3 . This can take up to a minute.
3. Extend your 2.4 GHz network.
a. Press the WPS
3b.
b. Press the WPS button on the side of your range extender.
light up and the indicator LED on the front of your range extender
green.
Watch the indicator L
connection was successful.
If it turns solid green
on the front of your range extender to blink amber
button on your router.
ED on the front of your range extender to verify whether the
, the connection was successful. Move to step 4.
Within the next two minutes complete step
The WPS button will
before
will blink
7