Publicidad
Idiomas disponibles
Idiomas disponibles
How to Install
There are two ways to use your Linksys extender: as a wireless range extender or as a wired
range extender (access point). Wireless range extenders repeat existing Wi
range extender s (access points) create new Wi
point with an Ethernet cable. Both scenarios require a router with a working Internet connection.
Before starting setup, decide whether you want to use your RE7000 as a wireless range extender
or as a wired range
extender (access point). Instructions for both setups are in this
Setting up as a wireless range extender
Wi -Fi Protected Setup (WPS)
Does your router have a WPS button?
WPS is a simple way to connect Wi
WPS have a button that might look like one of these symbols:
If your router has a WPS button, continue with WP
If not, or if you are n
ot sur e, continue with browser
Note —The WPS button will not work if you have disabled WPS on your router
chosen WEP as your network security type. In either case, continu
page 9 .
1.
Plug the range extender into an electrical outlet close to your router.
range extender to an ideal location later
the indicator LED on the front will
the Range Extender
-Fi hot spots when connected to a router or access
-Fi devices with Push Button Connect. Rou
S below .
-based setup on page
in step 5. After
blink green for up to a minute.
-Fi signals. Wired
user guide.
ters that support
9 .
, or if you have
e with browser -based setup on
You can move the
the range extender is
plugged in,
6
Publicidad
