Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
UNPACKING
Unpack the equipment where you will be using it. Place the carton
on a level flat surface. It is recommended that you place a protective
covering on your floor. Never open box when it is on its side.
IMPORTANT NOTES
All video and power outlets must be functional the day of delivery /
•
assembly of the product. The client is responsible for any additional
installation charges associated with return visits.
During each assembly step, ensure that ALL nuts and
•
bolts are in place and partially threaded.
Several parts have been pre-lubricated to aid in assembly and usage. Please do not wipe
•
this off. If you have difficulty, a light application of lithium grease is recommended.
WARNING!
There are several areas during the assembly process that special attention must be
paid. It is very important to follow the assembly instructions correctly and to make
sure all parts are firmly tightened. If the assembly instructions are not followed
correctly, the equipment could have parts that are not tightened and will seem
loose and may cause irritating noises. To prevent damage to the equipment, the
assembly instructions must be reviewed and corrective actions should be taken.
NEED HELP?
If you have questions or if there are any missing parts, contact Customer Tech Support.
TOOLS REQUIRED:
F 6mm Allen Wrench
F 5mm Allen Wrench
F Phillips Screwdriver
PARTS INCLUDED:
F 1 Main Frame
F 1 Stabilzer Tube
F 1 Stabilizer Tube Cover
F 1 Console Mast
F 1 Console Mast Cover
F 1 Console Mast Bracket
F 2 Upper Handlebars
F 2 Lower Handlebars
F 1 Pulse Grip Handlbar
F 1 Handlbar Joint Connector
F 1 Bottle Holder
F 1 Power Cord
F 1 Hardware Kit
Console sold separately
5
Publicidad
