Taurus Alpatec FRESKO INVISIBLE Instrucciones De Uso página 8

Downloaded by: pd-oliana on 11-04-2023 15:14 CEST
• Timer function: The appliance's operating time can be
controlled. To program an operating time, simply select it
by pressing one of the timers. (4).
• Airflow mode: Press button (6) to change the airflow to
natural mode. This mode is designed to provide a breezy
sensation, increasing and decreasing speed.
• Rotation direction change: The device has a button (3)
that allows the direction of rotation of the blades to be
changed.
• Summer function: The movement of the blades
generates a breeze that reduces the high ambient
temperatures and provides a pleasant sensation of
freshness.
• Winter function: In this way, the fan drives the hot air
accumulated on the ceiling of the room downwards,
balancing the room temperature and creating a cosy
climate.
• Light: Press button (5) to turn the light on/off. To change
colour, press also the button (5).
• IMPORTANT: When turning the light on and off, if it takes
more than 10 seconds to turn the light on again, it will
keep the same colour. If it takes less than 10 seconds,
the light colour will change.
HOW TO PAIR THE REMOTE CONTROL
• Switch on the fan, and within the first 10s, press the On/
Off button (2) for 2-5 seconds until an acoustic warning
sounds.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Turn the appliance off using the on/off button.
MAINTENANCE
• Here are some suggestions to help you maintain your fan.
• Because of the fan's natural movement, some
connections may become loose. Check the support
connections, brackets, and blade attachments twice a
year. Make sure they are secure. (It is not necessary to
remove the fan from the ceiling.)
• Clean your fan periodically to help maintain its new
appearance over the years. Use only a soft brush or
lint-free cloth to avoid scratching the finish. The plating
is sealed with a lacquer to minimize discolouration or
tarnishing. Do not use water when cleaning. This could
damage the motor or possibly cause an electric shock.
• There is no need to oil your fan. The motor has
permanently lubricated sealed ball bearings.
CLEANING
• Cut off the power before undertaking any cleaning task.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry it.
• Do not use solvents or products with an acid or base pH,
such as bleach, or abrasive products, for cleaning the
appliance.
• Do not let water or any other liquid get into the air vents to
avoid damage to the inner parts of the appliance.
• Never submerge the appliance in water or any other liquid
or place it under running water.
• If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration
of the appliance's useful life and could become unsafe
to use.