Klarstein SKYSCRAPER 2G Manual De Instrucciones página 15

All manuals and user guides at all-guides.com
USE AND CONTROLS
Controls
There are 4 control buttons on the control panel (top of tower fan body) and the
remote control.
Operating the fan
1 With the power cord plugged in, turn the tower fan on by pressing the power
button once.
2 Choose a fan speed by pressing the speed button.
3 If required, turn on the oscillation with the OSC button.
4 If required, set up the timer by pressing the timer button (a sequence of 0-7
hours).
5 Turn the tower fan off by pressing the power button a second time.
A timer can be set for 0-7 hours (in 1 hour
increments). Press this button to cycle up from 1 to 7
and then back to 0 (selected timer option is displayed
on the control panel – add the times up to determine
the full time). All other buttons continue to work while
the timer is in operation. To stop the timer function, set
the time to 0. Once the time has elapsed, the fan will
turn off.
Speed button: Once the fan is running (low), press
the Speed button once to increase the fan speed
to medium. Pressing again will increase the speed
to high, and once more will return the fan speed to
low. The set speed is indicated on the control panel
display.
OSC button: Once the fan is running, pressing the
OSC button will start the tower fan oscillating (OSC
indicator on control panel will light up). Press a
second time to stop the oscillation.
Power button: Once the power has been connected,
press this button to start the tower fan on low speed
(the low (L) speed indicator will light up). Press again
to turn off the fan.
EN
15