Publicidad
Idiomas disponibles
Idiomas disponibles
3.2. Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Place the unit in a way that ensures good air circulation. Maintain a
minimum clearance of 60 cm from any wall of the unit. Keep the unit away from any
hot surfaces. Always operate the unit on a level, stable, clean, fireproof and dry
surface and out of the reach of children and persons of impaired mental, sensory
and intellectual functions. Place the unit in such a way that the mains plug can be
reached at any time. Ensure that the power supply to the unit corresponds to that
specified on the identification plate!
ASSEMBLY OF THE UNIT
There is a recommendation for 2 people to assemble the unit. Before starting
assembly, check and prepare all the following parts included in the package:
(S1) Allen key, 2 pcs. (one
with a cross head)
(S4) Phillips head screw
M5x10mm, 4 pcs.
(S2) Allen head
screw M8x55mm,
thread 10 mm, 2 pcs.
(S5) Spring washer, 4
pcs.
(S3) Allen head screw
M8x16mm, 6 pcs.
(S5) Flat washer, 2 pcs.
Publicidad
