Publicidad
Idiomas disponibles
Idiomas disponibles
7. Install Air Conditioner into Cabinet
A. Lift air conditioner and carefully slide into cabinet leaving 6" protruding.
B. DO NOT press or apply pressure to controls or fi nned coils.
C. Be sure chassis is fi rmly seated towards rear of cabinet.
D. Installation of front is the reverse of removal outlined in Section 1.
8. Install Insulation and Weather Stripping (ENERGY STAR models only)
Measure the inner width
Fig. 20
of the side curtain
Fig. 22
User Manual
In order to minimize air leaks and ensure optimal insulation, it is
necessary to install the included accordion panel insulation to
the side curtain. Follow the instructions below.
A. After the unit is installed in the window, measure the inner
width of the side curtain as shown (Fig. 20).
B. Mark a line on the provided accordion panel insulation that
is 1/8" (3 mm) less than the measured width in step 1, then
cut the Accordion Panel Insulation along the line (Fig. 21).
Fig. 21
C. Slide the accordion panel insulation into the side curtain.
The side with the pattern should facing indoors. (Fig. 22).
D. Repeat on the other side.
Page 19
Publicidad
