Magneti Marelli Vision Guida Rapida página 36

Autodiagnosis
Using the following icons, you can:
Activate the environment for viewing
parameters and statuses. Within this
environment, you can:
- View other parameters by
selecting „Parameters and
status selection‟ option
- Save current parameter
reading to diagnostics report
using the „Save parameters in
the report‟ button
View trouble codes present in the ECU.
Using „Error cancellation‟ option, you
can delete these trouble codes from the
control unit, if the fault is no longer live
View activation controls of the available
actuators. Open this page and select
required activation, then press „Activate‟
View the possible control unit
coding/settings. Caution: these
functions alter control unit status so that
you must absolutely be aware of the
required operation before set-up
Control unit information such as hw
version
Diagnostics Report (Report is
automatically updated during these
operations). The report will be copied on
the USB MASS STORAGE drive that
must be inserted in the USB port and the
file can then be printed by any PC.
Indicates all operations available for the
vehicle