Magneti Marelli Vision Guida Rapida página 39

OK FUNCTIONS
The OK functions execute the functions according to the methods
and procedures required by the manufacturer. Once you select the
function, the software will automatically establish communication
with the affected control units to perform the operation.
1. Select "ok Function" in the top menu
2. Select one of the OK functions (identified with
3. Choose one of the procedures that can be performed.
4. Using the indicated cable, connect the instrument to vehicle
connector located where shown. Switch ignition key to on and
confirm when the instrument requires it.
5. The instrument communicates with the vehicle. If there are
faults on the vehicles, icon
6. Select the operation and execute it by pressing „Activate‟
button
CAUTION: Before executing the functions, check and delete all
trouble codes in the memory.
CAUTION: presence of trouble codes in the memory could
adversely affect the correct execution of the functions.
CAUTION: within the „SERVICE COUPON/MAINTENANCE‟
section, you can find the maintenance schedule and relevant
specifications.
VEHICLE SCANNING
This page features the following functions:
 VEHICLE ERROR CHECK

VEHICLE ERROR DELETION
These functions allow reading and deleting errors on the
vehicle.
will flash.
)