Epson ELPMB29 Manual Del Usuario página 11

(3) Fix the adjuster bolts on a flat surface on the bottom side of the tabletop temporarily. Slide
the adjuster bolts forward or backward if there are any obstacles on the underside of the
table.
Warning
❏
Tighten all adjuster bolts firmly after installation. Otherwise, the mount may collapse and
the projector may fall, causing damage or personal injury.
❏
Only tighten the adjuster bolts on the flat surface of the underside of the table.
Adjuster bolts
Each adjuster bolt requires a flat
surface with at least 2.4 inches
(60 mm) in diameter.
11