Dräger Nitrox 200 Instrucciones De Uso página 35

6.1 Maintenance work
6.1.1 Nitrox 200
Check function and leak tightness.
The system owner checks the device acoustically, visually or using
leak detection spray.
6.1.2 Connections and hoses
Check function and leak tightness.

Seals: Check for cleanliness.

Cleaning: Use a clean cloth.

Visual inspection: Visual inspection for damage.

Seals (Nitrox connection, supply hoses)

Seals are replaced without oil or grease and free from particles.
6.1.3 Digital pressure gauge
For maintenance work, adhere to the instructions for use from the
manufacturer or consult qualified personnel.
The replacement of the pressure gauge is carried out without oil or
grease and free from particles.
6.1.4 Dräger X-am® 5000
Carry out maintenance work on Dräger X-am® 5000 and the installed
sensor in accordance with the associated instructions for use.
Nitrox 200
Maintenance
35