Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
will be displayed on the LED screen
on the LED screen
• To cancel the programmed start-up, press the
button. The
symbol will not be illuminated on the LED screen.
PROGRAMMING SHUT DOWN
• With the appliance ON Press the
hours, the
symbol and
• Press the
or
down using the buttons (from 30 minutes to 24 hours).
• Press the
button again to activate the selected time. The
will be displayed on screen
LED screen.
• To cancel the programmed shut-down, press the
button. The
symbol will not be illuminated on the LED screen.
SLEEP
BUTTON
• The SLEEP function maintains the room at optimum temperature without
excessive fluctuations with silent operation. Fan speed is always at Low,
while room temperature adjusts gradually to ensure the most comfortable
environment operation of the appliance.
WHEN OPERATING IN COOL MODE
• Press the
button, and the
• Selected temperature will increase by 1°F (1°C) per hour in a 2 hour period.
This new temperature will be maintained for the next 6 hours, then the air
conditioner will turn off.
WHEN OPERATING IN HEAT MODE
• Press the
button, and the
• Selected temperature will decrease by 1°F (1°C) per hour in a 3 hour period.
This new temperature will be maintained for the next 5 hours, then the air
conditioner will turn off.
• When you select the SLEEP function, the screen will reduce the brightness, and
the fan speed is low.
• The SLEEP function can be canceled at any time during operation by pressing
the "Sleep", "Mode" or "fan speed" button.
• SLEEP function cannot be set In FAN or DEHUMIDIFY mode,
button twice, the LED screen will display
symbol will flash
button to set the time when you want the appliance to shut
. Remaining time will be displayed on the
symbol appears.
symbol appears.
. Remaining time will be displayed
button again or the
.
button again or the
ENGLISH
symbol and
Page 23
Publicidad
