Argo MILO PLUS Manual De Instrucciones página 39

USE WITH WINDOW UNIT KIT
1. To make the hole in the glass it is advisable to take
the porthole kit accessory to the glazier.
3. Insert the round fitting into the retractable flexible pipe and
insert the latter with its round fitting into the window unit
without the plug..
.
5 Insert the flat fitting onto the hose.
7. The outlet must be between 40 cm and 130 cm above the ground. Avoid tight curves or bends in the flexible hose.
V 11/19
2. Insert the window unit into the window.
4. Insert the round fitting onto the flexible pipe.
6. Slide the flat fitting downwards into the grooves (A) and
secure it with the hook (B).
The upward-facing side of the flat fitting is marked "TOP".
39