Descargar Imprimir esta página

Argo MILO PLUS Manual De Instrucciones página 46

Ocultar thumbs Ver también para MILO PLUS:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 119
LIGHT FUNCTION
Press the "+" and "FAN" buttons simultaneously for 3 seconds to set the activation/ deactivation of the lamp.
WIFI GUIDE
How to set and operate the air conditioner with Wifi
1. Make sure that the device (smartphone or Tablet) used is equipped with a standard version
of Android (version 4.4 or higher) and iOS (iOS7.0 or higher) as the operating system. For
more details refer to the App.
2. Units can be connected and controlled only via Wi-Fi network or via Hotspot function.
3. Routers with WEP encryption are not supported.
4. The application interface is universal for all products and many features may not match for
all units. It may vary depending on the operating system used or the update in use. Refer to
the current version.
5. If the access protection on your Router is active in the "MAC Filter" / "MAC address filter"
item, enable the access to the network of the MAC address of the device.
Installation and use instruction
1. Frame the QR Code using a QR Code Reader
or search for the "EWPE SMART" application in the app store
download and install the application.
Install the App by referring to its guide. Once the installation is complete, the icon
appears on the smartphone's home page.
NB:
Before starting any procedure, disconnect the power supply from the product, allow
a few minutes to pass and reconnect it.
V 11/19
46

Publicidad

loading