Descargar Imprimir esta página

Argo MILO PLUS Manual De Instrucciones página 58

Ocultar thumbs Ver también para MILO PLUS:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 119
Do not pour water onto the air conditioner to clean
it: this may damage the internal components or
cause a short circuit.
3. Storage.
When you do not envisage using the air conditioner for a long time, clean the filters before storing it away.
Keep the appliance in a vertical position at all times. Do not place any heavy objects on the
top and, if possible, protect the air conditioner with a plastic sheet.
4. Transport.
Preferably keep the air conditioner in the vertical
position when transporting it.
Should this not be possible, rest it on its right-hand side;
when it reaches its destination, immediately put the
appliance in the vertical position and wait at least 4 hours
before using it in the cooling mode.
5. For complete safety, regularly check the condition of the power cord; should it be damaged through use,
contact the Service Centre to replace it.
TIPS FOR MAXIMISING COMFORT AND MINIMISING CONSUMPTION
CHECK that:
the unit's extraction and delivery grilles are always unobstructed;
the air filters are always clean: a dirty filter will decrease the passage of air and thus reduce the unit
performance;
the doors and windows are closed, to avoid infiltration of unconditioned air;
the flexible hose is correctly positioned, without folds or sharp bends;
the room temperature is above 18 ºC for the cooling mode, and above 10 ºC for dehumidification mode.
REGULATION (EU) No. 517/2014 – F-GAS
The unit contains R290, a natural greenhouse gas with global warming potential (GWP) = 3 - Kg. 0.30 = 0.0009
Tons CO
equiv.
2
Do not release R290 into the atmosphere.
INFORMATION FOR THE CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EUROPEAN
DIRECTIVE 2012/19/EU
This appliance may not be scrapped with domestic waste at the end of its life cycle. We call your attention to the
crucial role played by the consumer in the re-use, recycling and other forms of recovery of such waste.
The appliance must be scrapped by a sorted waste disposal centre or by returning it to the retailer (no charge is
levied for this service), when you purchase a new equivalent appliance.
Sorted disposal of electric and electronic equipment prevents the negative effects on the environment and human
health resulting from improper scrapping, and also allows the materials from which it is made to be recovered and
recycled, with significant savings in terms of energy and resources.
The sorted disposal requirement is indicated by the crossed waste bin label affixed to the appliance.
V 11/19
www.argoclima.com
58

Publicidad

loading