Publicidad
Idiomas disponibles
Idiomas disponibles
This appliance is for household use only.
1.
surface where it cannot fall or
be pulled by the cord.
2. Plug the fan into a grounded
120-volt AC electrical outlet
(ordinary household current).
DO NOT use any other type of
outlet. Make sure that the rated
voltage of the fan is the same
as the power source before
plugging it into the power
source.
3. Turn the fan "ON" or "OFF"
by moving the power/speed
lever. The power should always
be OFF before unplugging the
fan.
Power/Speed
Lever
OPERATION
4. To select the speed, move the
5. To control the upward and
6. To make the fan oscillate, push
Figure 14
8
power/speed lever from OFF to
the desired speed setting: O (off),
I (Low), II (Medium), III (High).
loosen the screw on the side of
the fan housing neck. Adjust to
the desired angle and tighten
the screw.
the oscillation knob down. To
stop oscillating, pull the oscillation
knob up. The oscillation knob is
located on the top of the fan
housing, near the handle.
Handle
Oscillation Knob
Motor Housing
Up/Down
Adjustment Screw
Base
61901-01 R20210927
Publicidad
