Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE
Do not allow dispensing unit and master
cylinder reservoir to run dry. Use
pressure relief valve (8) to relieve
pressure and add new fluid if necessary.
22 Once all brakes are bled, relieve pressure in
reservoir (12) and master cylinder by
tilting pressure relief knob (8).
23 Close fluid dispensing hose (14) shut-off
valve, and carefully remove adapter from
master cylinder, being careful not spill
brake fluid.
24 Extract excess fluid or top-off master
cylinder as required, and replace cap.
25 Dispose of remaining hydraulic fluid.
26 Test brake or clutch system for leaks
before driving vehicle.
NOTE
Do not store hydraulic fluid in reservoir
(12). Clean dispensing unit with dena-
tured alcohol and store properly.
5
4
7
6
7
8
9
10
11
12
Fig. 4
Publicidad
