PNI HS004 Manual Del Usuario página 3

Set sensitivity
Set indicator LED
Testing the sensor
Move the ON/OFF button to the ON position. The LED indicator will flash
for 30 seconds, afterwards the sensor will enter normal operation mode. Set
the sensor to TEST mode. Move back and forth in front of the sensor. The LED
indicator lights up and will send a signal to the alarm system.
Simplified EU declaration of conformity
SC ONLINESHOP SRL declares that PIR Motion Sensor PNI HS004 is in
accordance with EMC Directive 2014/30/EU and RED Directive 2014/53/
EU. The full text of the EU Declaration of Conformity is available at the
following website:
https://www.mypni.eu/products/8075/download/certifications
User manual
The indicator LED lights up when the sensor detects
human presence
The indicator LED does not light up when the sensor
detects human presence
High sensitivity (default)
Standard sensitivity
Low sensitivity
3