Configuration of art. UT8020
Select product number UT8020 and set the following parameters:
1. Select Addressing / ViP address
1a. write ViP address 00000100 in the dedicated field
1b. press Write page to save the configuration
1c. wait for the device to restart
1d. run a system scan.
2. Select Buttons / Button configurations
f In the Available buttons section of art. UT8020, select 2.
f Press Write page to save the configuration.
3. Select Buttons / Buttons and configure the parameters as shown below:
4. Select Settings / Date and time and configure the parameters as shown below:
• Sync mode: Slave
26
1
2
3
4
5