Axxess AXDSPX-A2B3 Instrucciones De Instalación página 2

Factory Amp Harness
AXBK-1
AXDSPX-A2B3
Interface
Blue/White - Amp Turn-On Wire
2
Factory Amp
(must be removed)
Factory Amp
(must be removed)
Red/White - Do Not Use
CONNECTIONS
RCA Jacks
(sold separately)
Assignable outputs labeled
CH 7-10 to be used
for optional amps.
Gray - Front Right + Purple - Rear Right +
Gray/Black - Front Right - Purple/Black - Rear Right -
White - Front Left + Green - Rear Left +
White/Black - Front Left - Green/Black - Rear Left -
Brown/White * - Center + Dark Blue/Pink * - Center -
An SPDT relay, Metra part number
E-123, must be used if the amp turn-on
current of all amps exceed 1-amp.
Brown/Yellow - Subwoofer Right +
Brown/Blue - Subwoofer Right -
Green/White - Subwoofer Left +
White/Red - Subwoofer Left -