Axxess AXDSPX-A2B3 Instrucciones De Instalación página 4

Idiomas disponibles

• If the Red light in the AXDSPX-A2B3 interface is blinking, it is not communicating with the vehicle. Remove the key from the

ignition, unplug the connectors from the interface, then inspect all connections made. If everything is proper, connect the

harnesses back into the interface, cycle the key to ignition, then re-inspect. The Red light should be solid.

AxxessInterfaces.com

TROUBLESHOOTING

AXDSPX-A2B3

I N S TA L L AT I O N I N S T R U C T I O N S

Having difficulties? We're here to help.

Contact our Tech Support line at:

386-257-1187

Or via email at:

techsupport@metra-autosound.com

Tech Support Hours (Eastern Standard Time)

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 7:00 PM

Sunday: 10:00 AM - 4:00 PM

NOWLEDGE IS

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.edu or call

386-672-5771 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certified technicians

REV. 2/7/23 INSTAXDSPX-A2B3

OWER