Axxess AXDSPX-A2B3 Instrucciones De Instalación página 3

1. Locate the factory amp, unplug all connectors, then remove the amp.
2. Install the AXDSPX-A2B3 harness and make all necessary connections, but leave the amp
turn-on wire disconnected.
Note: Ensure the USB connector from the factory amp is connected to the AXDSPX-A2B3.
3. Plug the 12-pin and 16-pin connectors from the AXDSPX-A2B3 harness into the
AXDSPX-A2B3 interface.
4. Download and install the AXDSP-XL app from the Google Play Store or Apple App Store.
5. Open the app and follow the instructions on the Bluetooth Connection tab to pair the
mobile device to the AXDSPX-A2B3. (Figure A)
6. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down button to
save the configuration. (Figure B)
7. Connect the amp turn-on wire from the AXDSPX-A2B3 harness.
8. Click the Identify button to confirm that the AXDSPX-A2B3 is connected properly. If so, a
chime will be heard from the front left speaker or gauge cluster. Test all functions of the
installation for proper operation.
9. Adjust the DSP settings in the app as desired. Refer to the instructions under the Setup
Instructions tab, or online at Axxessinterfaces.com
INSTALLATION
for an explanation of each tab in the app.
(Figure A)
(Figure B)
3
REV. 2/7/23 INSTAXDSPX-A2B3