UFESA Pulsar 600 Delux Manual De Instrucciones página 13

USE
- Unwind the cable fully before plugging it in.
- Connect the appliance to the mains.
- Turn on the appliance using the on/off button.
- Select the desired function of the appliance.
- Select the desired speed.
- Start mixing the food you wish to process.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
- Stop the appliance by releasing the pressure on the on/off button.
- Disconnect the appliance from the mains.
- Put the cable back in the cable box.
- Clean the appliance.
ACCESSORIES: BLENDER ACCESSORY ATTACHMENT (FIG. 1)
- This accessory can be used to make sauces, soups, mayonnaise, milk shakes, baby food, etc.
- Connect the rod to the body of the motor and turn it in the direction indicated by the arrow (Fig. 1).
- Place the food to be prepared in the recipient and turn on the appliance. W
cubes no more than 15 mm in size.
- For additional cleaning, disconnect and extract the rod by turning it in the opposite direction indicated by the
arrow (Fig. 1).
Do not use the appliance for more than one minute at a time. In the event of operating in cycles, allow the
appliance to rest for a period of at least one minute between each cycle.
In order to ensure the sealing effect of blending blade, please do not allow the blending blade to work
without immersing into liquids.
WHISK ACCESSORY (FIG. 3)
- This accessory can be used for whisking cream, egg whites, etc.
- Connect the whisk to the whisk mechanism unit of the motor by turning it in the direction indicated by the
arrow (Fig. 3).
- Place the food in a large recipient and turn on the appliance.
the right.
- Remove the whisk accessory and release it from the mechanism connection (Fig. 3)
- Note 2: Pull the whisk to release it from the mechanism's mount.
CHOPPING ACCESSORY (FIG. 4)
This accessory can be used to chop up vegetables, meat, etc.
- Place the food to be prepared into the recipient for it to be cut with the blades inside and close the lid tight.
We suggest cutting the food into the appropriate forms and sizes. E.g. cut meat into 2 cm x 2 cm x 6 cm
strips, cut onions into 4 to 6 discs, etc.
- Place the adaptor into the motor unit by turning it in the direction indicated by the arrow.
- Attach the unit to the cover and turn on the appliance (be careful: do not turn on the appliance if the whole
unit has not been properly installed and connected).
- Turn off the appliance when the food has reached the desired texture.
- Remove the unit from the lid and release the adaptor.
e suggest cutting the food into
To achieve the best results, turn the whisk to
EN
13