Descargar Imprimir esta página

HomeMatic IP HmIP-STV Manual De Instalacion Y Uso página 24

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
Function and device overview
The device must only be operated within residential buildings.
Using the device for any purpose other than that described in this
operating manual does not fall within the scope of intended use and
will invalidate any warranty or liability.
3
Function and device overview
The compact Homematic IP Tilt and Vibration Sensor, which is easy to in-
stall, reliably detects position changes of 10–45 degrees and vibrations at
the desired installation position. The device can be used flexibly in indoor
rooms or in weatherproof outdoor locations.
The Tilt and Vibration Sensor can be used with versatility in the Homemat-
ic IP System to register movements or changes, e.g., at garage doors,
windows, letterbox flaps and containers.
Expanded configuration options, such as defining the triggering threshold
for vibrations or setting the triggering angle in position detection are also
available via the free Homematic IP smart phone app or the WebUI of the
CCU3 central control unit.
Status and position information is transmitted to the Homematic IP smart
phone app or WebUI and can be easily accessed at any time.
Device overview (see figure 1):
(A) System button (pairing button and LED)
(B) Screw holes
(C) Battery compartment cover
(D) Latch for the battery compartment cover
(E) Battery compartment
24

Publicidad

loading