Publicidad
Idiomas disponibles
Idiomas disponibles
Brief steady or-
ange light (after
green or red con-
firmation)
Alternating long
and short orange
flashing
6x long red flash-
es
1x orange, 1x
green lighting
(after inserting
batteries)
9
Restore factory settings
The device's factory settings can be restored. If you do this, you will
lose all your settings.
To restore the factory settings of the device, please proceed as follows:
•
In the mounted condition, the device can be separated easily
from the mounted battery compartment cover (C) by pressing
the latch (D) up(see figure 2).
•
Remove a battery ( see figure 7),
•
Insert the fresh battery making sure that it is right way around
while pressing the system button (A) at the same time. Press and
hold down the system button until the LED (A) starts to flash
quickly orange (see figure 8).
•
Release the system button briefly and then press and hold the
system button again until the orange flashing changes to a green
light (see figure 9).
•
Release the system button again to conclude the procedure.
The device will perform a restart.
Batteries empty
Device software updating
(OTAU)
Device defective
Test display
Restore factory settings
Replace the batteries
of the device (see „7
Changing the batteries"
on page 28).
Wait until the update is
completed.
Please see your app for
error message or con-
tact your retailer.
You can continue once
the test display has
stopped.
31
Publicidad
