HomeMatic IP HmIP-STV Manual De Instalacion Y Uso página 25

4 Position detection
The Tilt and Vibration Sensor can detect position changes in a freely con-
figurable angle (i) of 10-45° from the horizontal. Therefore, to be able to
detect position changes the device must be mounted horizontally. You
can turn the device flexibly for installation. Make sure that the inserted
batteries must always be aligned horizontally.
5 General system information
This device is part of the Homematic IP smart home system and works
with the Homematic IP protocol. All devices of the system can be con-
figured comfortably and individually with the user interface of the Central
Control Unit CCU3 or flexibly via the Homematic IP smartphone app in
connection with the Homematic IP cloud. All available functions provided
by the system in combination with other components are described in
the Homematic IP Wired Installation Guide. All current technical docu-
ments and updates are provided at www.homematic-ip.com.
y
i
Position detection
i
x
25