Zizito FONTANA II Manual De Instrucciones página 20

EN
4.3.5 Through the other slot again (fig. 13).
4.3.6 Flat the metal part to finish (fig. 14).
4.4 Adjust the height of shoulder belt.
Notice: CS128 child seat's harness have 2 height
position, the top of the shoulder belt must be paral-
lel or a little higher than he child's shoulders. That
can provide the effective protect for your child at
collision. Follow the step as below.
4.4.1 Release the harness before adjust the
height, one hand press down the center adjuster
button (part no. 03 page 01) at the same time the
other hand hold the shoulder belt(part no. 03 page
01)and pull back.
(fig.15)
4.4.2 Press on the release button (part no. 23) and
separate the buckle tongue,(part no.24 page 01).
(fig.16)
4.4.3 Insert the both tongue through the slots
(fig.17)
4.4.4 At the rear side insert both tongue into other
slots.
(fig.18)
4.4.5 Then combine the two tongue and insert into
the buckle housing(part no.22 page 01) again to
finish the adjustment.(fig.19,20)
20