Motorola PMLN6588 Instrucciones De Usuario página 7

Battery Locating Rail Adapter (applicable to CP/DEP/
DP/EP/GP/PR/XiR Commercial Radio Battery Charger
Only)
The battery locating rail is a removable part which constitutes an adapter to
accommodate standard and slim batteries. Refer to the charger electronic
user manual (Standard batteries for CP/DEP/DP/EP/GP/PR/XiR
Commercial Radios) for list of standard and slim batteries.
The CP/DEP/DP/EP/GP/PR/XiR Commercial Radio Battery Charger is
shipped with the battery locating rail in the standard battery position.
To change to the slim battery position:
1. Remove the battery locating rail by pinching inward both sides while
pulling from the charger pocket.
2. Turn the battery locating rail around so the back faces the front.
3. Re-insert into the charger pocket.
CHARGING POCKET INSTALLATION
W A R N I N G
Removing Charging Pocket from Multi-Unit Charger
1. Remove the screw that secures the Charging Pocket to the base.
2. Lift the Charging Pocket a few inches away from the base.
3. Remove the Pocket Harness by pulling straight up on the connector
(refer to Figure 3).
Securing Charging Pocket to Multi-Unit Charger
1. Connect Pocket Harness by plugging in the connector to the
receptacle on Multi-Unit Charger (refer to Figure 3).
2. Slot in the Charging Pocket to the base and ensure the Charging
Pocket is flushed in to the Multi-Unit Charger. Affix the Charging
Pocket screw.
To reduce risk of electric shock, unplug the charger
from the AC outlet before removing or replacing
Charging Pocket.
5