Descargar Imprimir esta página

PEDROLLO TISSEL-100 Instrucciones Originales De Uso página 24

Variador electrónico de frecuencia

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
DESCRIPTION OF THE PRODUCT
TISSEL-100 is a speed regulator with the following characteristics.
• Input is a single-phase alternating voltage.
• Supplies a three-phase alternating voltage.
• Keeps the pressure of the installation constant (curves with variable revolutions).
• Controls the hydraulic and electrical operating parameters, and protects the pump from faults.
• It can be fitted with an expansion card which enables it to work in parallel with other inverters in the pump units and to man-
age an input signal and an output signal.
• It adapts to function with any type of pressurisation plant including current ones.
• It is energy saving as it limits the start-up and operating electric current.
• Allows the selection of the supply and output voltage..
LIST OF PARTS
5
6
1. Inverter
7
11
10
2. Pump
3. Control Panel
1
4. Cable seal
4
5. Power card cover
6. Three part coupling
7. Technical data plate
8. Fuse
3
8
9
6
9. Non return valve group
2
10. Expansion card cover
11. Capacitors box cover
DESCRIPTION OF CONTROL PANEL
6
1. ON/OFF switch
2
2. LED – red when POWER on
3. LED – green when in operation STATUS
4. Display
5. SET key
6. Keys of the slider arrows
5
1
3
LIMITATIONS OF USE
4
• Maximum working pressure: 9 bar (130 p.s.i.).
• Permissible fluids: clean water and chemically non-aggressive liquids; if the liquids contain impurities install a filter upstream.
• Maximum ambient temperature: 40 °C, with the possibility of changing the air.
• Minimum ambient temperature: 0 °C
• Maximum temperature of the fluid: 50 °C
• Minimum temperature of the fluid: 0 °C
• Permitted variation in the supply voltage +/-10% compared to the plate data.
• Tissel-100 is not suitable for pumping inflammable liquids or for operating in areas where there is a danger of explosion.
24
| ENGLISH

Publicidad

loading