Publicidad
Always follow all safety precautions when cleaning and servicing the POWER
NOZZLE.
WARNING
Electrical Shock or Personal Injury Hazard.
Disconnect the electrical supply before
servicing or cleaning the unit. Failure to
do so could result in electrical shock or
personal injury from cleaner suddenly
starting.
Push in and turn
Enfoncer et tourner
Empuje hacia adentro y gire
POWER NOZZLE CARE
Replacing Headlight Bulb
- 34 -
➢ ➢ To remove light cover use a flat
blade screwdriver, gently prying
one side of the light cover up.
➢ ➢ After freeing one side, lift up to
remove.
➢ ➢ Push in and turn bulb counter-
clockwise to remove.
➢ ➢ Replace the bulb.
➢ ➢ Only use a bulb rated 130 V AC-15
Watts.
To Replace:
➢ ➢ Fit the rear tabs into the rear of the
housing and press the sides down
until it snaps in place.
Publicidad
