Publicidad
Motor Safety
Filter
Filtre de sécurité
du moteur
Filtro
Hose Latch Tab
Languette de blocage
du tuyau
Pestaña de sujeción
de la manguera
Notch
Fente
Ranura
Canister
➢ ➢ Open canister hood.
➢ ➢ Check dust bag (See CHANGING DUST
BAG for instructions).
➢ ➢ Check filter (See MOTOR SAFETY FILTER
CLEANING for instructions).
Hood
➢ ➢ It is normal for the canister hood to
come off when it is opened further than
needed.
➢ ➢ Line up the hinges, insert them, and
close the hood to replace it.
Hose
➢ ➢ Line up the hose latch tab and notch in
canister hood and insert hose into
canister until it snaps in place.
To Remove:
➢ ➢ Lift hose latch tab upward and pull up on
hose.
➢ ➢ Insert handle into wand until lock
button snaps in place.
➢ ➢ Be sure the hose is not twisted.
To Remove:
➢ ➢ Press handle release button and pull up
on handle.
- 16 -
Publicidad
