Publicidad
Idiomas disponibles
Idiomas disponibles
en
ENGLISH
l) Do not attempt to fell a tree until you have an
understanding of the risks and how to avoid
them. Serious injury could occur to the operator or
bystanders while felling a tree.
m) Follow all instructions when clearing
jammed material, storing or servicing the chain
saw. Make sure the switch is off and the battery
pack is removed. Unexpected actuation of the
chain saw while clearing jammed material or
servicing may result in serious personal injury.
Causes and operator prevention of kickback
Kickback may occur when the nose or tip of the
guide bar touches an object, or when the wood
closes in and pinches the saw chain in the cut.
Tip contact in some cases may cause a sudden
reverse reaction, kicking the guide bar up and back
towards the operator.
Pinching the saw chain along the top of the guide
bar may push the guide bar rapidly back towards
the operator.
Either of these reactions may cause you to lose
control of the saw which could result in serious
personal injury. Do not rely exclusively upon the
safety devices built into your saw. As a chain saw
user, you should take several steps to keep your
cutting jobs free from accident or injury.
Kickback is the result of chain saw misuse and/or
incorrect operating procedures or conditions and
can be avoided by taking proper precautions as
given below:
a) Maintain a firm grip, with thumbs and fingers
encircling the chain saw handles, with both
hands on the saw. and position your body and
arm to allow you to resist kickback forces.
Kickback forces can be controlled by the operator,
if proper precautions are taken. Do not let go of the
chain saw.
b) Do not overreach and do not cut above
shoulder height. This helps prevent unintended tip
contact and enables better control of the chain saw
in unexpected situations.
c) Only use replacement guide bars and saw
chains specified by the manufacturer. Incorrect
replacement guide bars and saw chains may cause
chain breakage and/or kickback.
d) Follow the manufacturer's sharpening and
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to
increased kickback.
Additional Safety Instructions:
Pull
object in the wood, the chainsaw can be pulled
forward. For this reason, whenever possible,
always place the pronged stop of the machine
against the wood.
14
If the pronged stop of the
chainsaw is not placed against
the wood to be cut and - when
cutting at the lower edge of the
guide rail - the guide rail jams,
or if the chainsaw meets a hard
Caution! There is a risk of injury when
working with the machine.
WARNING – General hazards!
Read the operating instructions.
Wear protective goggles.
Wear ear protectors.
Do not expose to rain.
Always use the chainsaw with both hands.
Always use the chainsaw with both hands.
Be aware of the chainsaw kickback and do
not touch the point of the guide rail. Note the
safety information about the kickback and
measures for avoiding it.
Be aware of the chainsaw kickback and do
not touch the point of the guide rail. Note the
safety information about the kickback and
measures for avoiding it.
Be aware of the chainsaw kickback and do
not touch the point of the guide rail. Note the
safety information about the kickback and
measures for avoiding it.
Use battery packs with the same
capacity.
Use battery packs that have the same
amount of charge.
The chainsaw must not be used in the rain. Never
leave the machine outdoors in rainy weather!
When working with the chainsaw, wear working
gloves, suitable footwear, leg protection, eye and
ear protectors.
When working in areas where there is possibility of
head injuries, wear a helmet and when felling and
delimbing trees, wear an additional face mask.
Ensure the chainsaw is correctly tensioned. A loose
chainsaw can jump up and cause serious or even
fatal injuries.
To prevent accidental starting: Always remove the
battery packs before checking the chain tension,
retightening the chain, changing the chain,
eliminating faults and prior to every change of
workplace.
Remove the battery packs from the machine before
making any adjustments, changing tools,
maintaining or cleaning.
Protect battery packs from water and
moisture!
Publicidad
