Metabo MS 36-18 LTX BL 40 Manual Original página 20

en ENGLISH
f
13. Technical Data
Explanatory notes on the specifications on page 3.
Subject to change in accordance with technical
progress.
U = Voltage of battery pack
L = Guide rail length
max
L = Usable blade cutting length
v = Chain speed in idling
K
K = Sawing chain, spacing
T
K = Sawing chain, number of driving links
A
K = Sawing chain, driving link thickness
T
V = Oil reservoir volume
Oil
m = Weight (without oil, guide rail, sawing
1
chain, battery pack)
m = Weight (with guide rail, sawing chain, full
2
oil tank, without battery pack)
S = Cut protection class
Measured values determined in conformity with
EN 62841.
Permitted ambient temperature during operation:
-20 °C to 50 °C (limited performance with
temperatures below 0 °C). Permitted ambient
temperature for storage: 0 °C to 30 °C.
Recommended ambient temperature when
charging: 0 °C (32 °F) to 40 °C (104°F).
direct current
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 62841:
a = Vibration emission value (sawing
h
hardwood trunk)
K = Uncertainty (vibration)
h
Typical A-effective perceived sound levels:
L = sound pressure level
pA
L = acoustic power level
WA
K , K = uncertainty
pA WA/WA(G)
L = guaranteed acoustic power level as
WA(G)
per 2000/14/EC
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
20