Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Simple installation
Step 1: Dryer should be placed in a ventilated
area with not less than 10 cm distance from the
wall. If placed in a room such as a bathroom, it is
suggested there are no obstacles within 1.5m in
front of dryer and to keep it ventilated.
Step 2: Horizontal adjustment
Tie a heavy object to the end of a string and hang it on the front and
two sides of the dryer. Please refer to the picture below: and if A=A
and B=B, this means the dryer is placed horizontally. If it's not, you
can place a support on the ground to level the tumble dryer.
Notice:
If the dryer cannot be placed horizontally (the lean angle is no more
than 2), the dryer will work unbalanced or stop working sometimes.
Notice when installing:
Do not install the dryer in the open air or a place that can easily
be damaged by rain;
Do not place the back of dryer near curtains or something in the
wind;
Do not place the dryer near gas or flammable area.
Step 3: Fixing of the flexible tube
Connect one side of the flex tub to the back vent, then fix it till
tight.
The other end of flex tube must be extended to the outdoor,
please refer to the pictures below for the right way of
assembling it.
11
V.2
Publicidad
