Descargar Imprimir esta página

EAS ELECTRIC EMTD7EC Manual De Instrucciones página 32

Ocultar thumbs Ver también para EMTD7EC:

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION
Control Panel
Following are instructions for starting and using your new dryer. Please
refer to specific sections of this manual for more detailed information.
Important Warning: To reduce the risk of fire, electric shock, or injury to
person, read this entire manual, including the Important Safety
Instructions, before operating this dryer.
7
On/Off
Intensity
1) Press the Sonido button to select the on or off signal function. The
buzzer will prompt from the dryer when finishing the cycle. Press the On/
Off button and pull out the power cable.
2) Press the Intensidad button to select adjust the dryness level of the
laundry. The level has three grades
minutes in every grade.
(1).The intensity function can be activated only before the programme
start.
(2).Press the Intensidad button repeatedly to select the drying time.
3) Press the Diferido button to select delay clothes drying within 24 hours.
You can press this key continuously; it can be selected within 1-24 hours .
4) Press the Anti-Arrugas button to select the fuction, at the end of the
drying cycle, the anti-crease operation time is 30 minutes (default ) or 120
minutes (selected). The Anti-Arrugas light shall illuminate when the anti-
crease function is selected. This function prevents the laundry from
creases.
5) If users need child lock function, pressing the Anti-Arrugas and Diferido
buttons simultaneously for over 3 seconds to start child lock function.
6) Clean the filter, cabinet and inner tube.
7) This symbol
cotton programme", which is most suitable to dry normal cotton load at
rated load capacity.
8) Please clean the filter when the "Filter" light is flashing, after the dryer
stop.
Start/Pause
Delay
means the energy efficiency test programme "standard
6
Signal
6
Anti-Crease
. The drying time increases 3
12
7
Program Knob
V.2

Publicidad

loading