Publicidad
Idiomas disponibles
Idiomas disponibles
4.2. Setting the date and time
1. After the new batteries are activated, the year
number flashes in the display. You can advance the
year by pressing the "M" button. To confirm and
then set the month, press the time button.
2. You can now set the month using the "M" button.
To confirm and then set the day, press the time
button.
3. Please follow the instructions above to set the day,
hour and minutes.
4. Once you have set the last minute and pressed the
time button, the date and time are set and the time
is displayed.
5. If you want to change the date and time, press and
hold the time button down for approx. 3 seconds
until the user icon starts to flash. Release and
repress the button until the year icon blinks. Now
you can enter the new values as described above.
4.3. Select the User
This blood pressure monitor is designed to store 99
measurements for each of two users. Before taking a
measurement, be certain that the correct user has
been selected.
a) With the unit off, press and hold the TIME
button for 3 seconds until the user icon in the
upper left corner of the LCD screen flashes.
b) Press the "M" button to toggle between users.
c) Press the START button to make your selection.
18
Memory
Button
Time/Date
Button
TIME
PM
Publicidad
