Publicidad
Idiomas disponibles
Idiomas disponibles
7. Error messages/Troubleshooting
If an error occurs during a measurement, the measurement is
discontinued and a corresponding error code is displayed
(Example: Error No. 2).
Error No.
ERR 1
ERR 2
ERR 3
ERR 5
HI
LO
* If this or any other problem occurs repeatedly, please consult
your doctor.
26
Possible cause(s)
No pulse was detected. Ensure the cuff is properly
placed on the inside of you wrist and repeat a
measurement
Unnatural pressure impulses influenced the
measurement result. Reason: The arm was moved
during the Measurement (Artefact). Repeat, keeping
still and quiet.
Inflation of the cuff takes too long. The cuff is not
correctly seated. Re-position cuff and repeat
The measured readings indicated an unacceptable
difference between systolic and diastolic pressures.
Take another reading following directions carefully.
Contact your doctor if you continue to get unusual
readings.
The cuff pressure is too high. Relax for 5 minutes and
repeat the measurement.*
The pulse is too low (less than 40). Repeat the
measurement.*
Publicidad
