Descargar Imprimir esta página

Alice's Garden ALBE XXL SL175BDC Manual De Instrucciones página 11

Ocultar thumbs Ver también para ALBE XXL SL175BDC:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
ADVICE FOR ASSEMBLY
Thoroughly respect the assembly instructions. This product must be assembled by an adult.
Keep children away during assembly : risk of suffocation with small parts.
Do not lose the instruction sheet so that you may refer to it when needed as this also includes the
identification of the components used by the after sales service,
Before commencing, check that none of the parts are missing. You can keep excess parts as spares
for future use when necessary.
MAINTENANCE
Inspect and perform maintenance as follows:
Major wooden parts: Inspect for splintering and structure defects at regular intervals.
For very minor splinters or chipping, lightly sand down and reapply a protective exterior water re-
pellent oil on the treated area.
If timber has cracked or split significantly, replacement parts may be required, please contact our
after-sales service for any replacement requirements.
This product contains wood (pin), you should treat it with a protection product for exterior wood.
The metal parts do not need any particular care. However, in certain regions (ie seaside areas), cer-
tain coatings could be prone to damage. In this case, it is advised to use a rust prevention treatment.
The ground on which the play centre is placed should be controlled regularly. All elements such as
stones or other objects that could cause injury in the case of a fall, should be removed.
Make sure there is no damage before each use (bolts, connectors, tubes ...). Replaced as neces-
sary.
All parts that are under constant friction can be oiled regularly whith a suitable lubricant.
It is advised to remove the product during the winter period, when not in use, to avoid any deterio-
ration due to bad weather conditions.
GUARANTEE
Exclusions of guarantee :
The normal wear of the product.
An unsuitable usage of the first function of the product.
Damaging related to the assembly.
The pieces that were assembled or repaired improperly.
Fir wood is a living material that never stops altering and may be slightly deformed.(wood can be
slightly warped) or have imperfections such as splits, knots and resinpockets. It may also lose its
shine, darken...This is normal and does not affect the lifespan of your shed. Wood pulp (not sup-
plied) can be an easy solution.
The wear of the slide (color, break...)
05/12/2022
EN
11

Publicidad

loading