Techno Line WS8056 Manual De Instrucciones página 23

Idiomas disponibles



While viewing alarm AP, press and hold down the "ALARM" button for 2 seconds until

year display of the alarm date starts to flash. Use the "UP" and "DOWN" buttons to set the

required hour. Press "ALARM" button to confirm your setting.



The month display of the alarm time starts to flash. Use the "UP" and "DOWN" buttons to

set the required month. Press "ALARM" button to confirm your setting.



The date display of the alarm time starts to flash. Use the "UP" and "DOWN" buttons to set

the required date. Press "ALARM" button to confirm your setting.



The hour display of the alarm time starts to flash. Use the "UP" and "DOWN" buttons to set

the required hour. Press "ALARM" button to confirm your setting.



The minute display of the alarm time starts to flash. Use the "UP" and "DOWN" buttons to

set the required minute. Press "ALARM" button to confirm your setting and to end the

setting procedure.

Notes:



After 30 seconds without pressing any button the clock switches automatically from alarm

setting mode to normal display mode.



Press and hold the "UP" or the "DOWN" button to speed up the setting of values.

EN9