Timex COMMAND ENCOUNTER Digital Manual De Instrucciones página 4

•
Press (B) to change setting (sequence as follows): Hour → Minute → Second → Month
→ Day → Year → 12/24 Hour Format → Date Format → Chime (Hourly) → Beep
(Buttons). Press (C) to change value. Press (B) advance to next setting.
•
Press (D) when complete. If no input for 3 minutes watch will exit Time setting mode and
return to TOD.
•
Note: while in TOD mode press (C) to toggle between time and day of week.
Chronograph Mode
Enter Chronograph mode:
•
Press (B) until CHRONO appears.
•
Press (C) to start or stop, press (D) to clear ("00'00"00).
•
When chronograph is running, press (D) to take current Lap or Split time and the display
will flash for 10 seconds. At the same time, chronograph will continue counting for a new
Lap, and after 10 seconds it will display the new Lap or Split information.
•
Elapsed time is shown in 1/100
shown in one-second units.
•
Chronograph operation when started will continue to function even if you change to
another mode. Maximum run time for stopwatch is 23 hours / 59 minutes / 59 seconds.
Countdown Timer Mode
Enter Countdown Timer mode:
•
Press (B) until TIMER appears.
Configure countdown timer:
•
Press (D) until digit begins to flash. Press (C) to advance (press and hold to
advance quickly).
•
Press (B) to scroll through Hour / Minute / Second / Repeat (press (C) for On/Off).
•
Press (D) to exit countdown timer setting mode.
Use countdown timer:
•
Once desired countdown time has been set press (C) to start timer.
•
Press (C) to stop timer if needed. Timer can be reactivated by pressing (C) again.
•
When timer reaches '0:00:00' press any button to turn off.
•
Press (D) to reset timer.
Alarm Mode
Enter Alarm mode:
•
Press (B) until ALARM appears.
•
In Alarm mode, press (C) to turn Alarm On/Off (when 'On' a small icon will appear on left
side of display).
Set Alarm:
•
In Alarm mode press (D) until digits flash.
•
Press (B) to select hours / minutes / AM/PM. Use (C) to increase numbers.
•
Once desired alarm time is selected press (D) to return to Alarm mode.
•
If no buttons are pressed within 2 minutes, watch will exit setting and return to
Alarm mode.
•
When alarm activates, press any button to turn Off.
Page | 3
th
-second units. After the first hour, elapsed time will be