Publicidad
Idiomas disponibles
Idiomas disponibles
Ice maker mode
1. Under unlocked state, press the button "E" (Ice maker mode selector) and hold for
3 seconds, the buzzer rings once, the indicator "e2" (Ice maker mode) illuminates, and
then the ice maker mode will be turned on.
2. When the indicator "e2" (Ice maker mode) illuminates, press the button "E" (Ice maker
mode selector) and hold for 3 seconds, the buzzer rings once, the indicator "e2" (Ice
maker mode) goes off, and then the ice maker mode will be turned off
Hold for 3s
Notice
When the application is powered on, the ice maker is off by default.
When you don, t need ice cubes for a long period of time, please turn off the Ice Maker
function, empty the container and insert the cleaned container.
The Icemaker can only be configured with manufacturer or purchased from its service agent.
Water intake function
Under any state (locked or unlocked), press the button "H1" (Water intake function selector),
the buzzer rings once, the indicator "h1" (Water intake function) illuminates, and then the
water intake function will be turned on.
Notice
1. When the indicator "h1" (Water intake function) illuminates, the indicator "h2" (Cubed
ice function) and the indicator "h3" (Crushed ice function) go off After the dispenser
paddle is pressed, water will flow out of the intake port.
2. When the water intake time reaches 150s, the refrigerator will beep and keep water
until the time reaches 180s, the water will be cut off and the water valve will enter the
200s protection time, and then water intake can be carried out again.
3. When the cumulative water intake time reaches 5min within 10min, the water valve
enters the 10min protection time, and then water intake can be carried out again.
20
Use
indicator on
Ice making function on
Press 1 time
Hold for 3s
Ice making function off
Indicator on
Water intake function on
CONTENTS
Indicator off
Publicidad
