Publicidad
Idiomas disponibles
Idiomas disponibles
Note: Please take a moment to verify that the following items were included in your SWR Baby Baby
Blue packaging: AC Cable, SWR Catalog.
BABY BABY BLUE – FRONT PANEL FEATURES
• High ("passive/active") and low ("active") sensitivity 1/4" inputs
• Gain control with LED peak preamp clipping indicator
• Aural Enhancer Control
• 3 band semi-parametric EQ
• EQ bypass switch
• Effects Blend Control
• Effects Loop bypass switch
• Master Volume Control with LED peak power amp clipping indicator
BABY BABY BLUE – REAR PANEL FEATURES
• Side-chain effects loop
• Balanced XLR Output with select switch for Line or Direct Mode
• XLR pad (level) control with ground/lift switch
• 1/4" Line Out Jack
• Tuner Out Jack
• Headphone Jack
• Speaker Fuse: 3AG, 8 amp fast-blo
• Line Fuse
• 3-Position Tweeter Mode Switch (on back of cabinet)
SPECIFICATIONS
ELECTRONICS
Note: All measurements were taken with a line voltage of 120VAC.
Maximum power at 1kHz under clipping
120 Watts RMS @ 8 ohms
Power Amp Distortion (1kHz)
0.02% THD, 100 Watts RMS @ 8 ohms
0.03% THD, 100 Watts RMS @ 4 ohms
Intermodulation Distortion
@ 8 ohms, 100 Watts RMS, 60/7kHz, 4:1, =0.05%
Frequency Response (power amp):
–3db at 10 Hz and 22kHz
System Distortion (Gain and Master Volume full, enhancer and tone controls set flat, 1kHz):
0.5% THD
BABY BABY BLUE • 7
Publicidad
