Philips sonicare ExpertClean 7000 Serie Manual De Instrucciones página 21

Ocultar thumbs Ver también para sonicare ExpertClean 7000 Serie:

Idiomas disponibles

Charging and battery status

5 Close the door and press the green power on/off

button once to select the UV clean cycle.

Note: you can only switch on the sanitizer if the door is

properly closed.

Note: the sanitizer stops operating if you open the door

during the sanitizer cycle.

Note: The sanitizer cycle takes approximately 10 minutes

and then switches off automatically.

The sanitizer is in operation when the light glows

through the window.

This Philips Sonicare toothbrush is designed to provide at

least 28 brushing sessions, each session lasting 2 minutes

(14 days if used twice per day) on a fully charged battery.

The battery indicator shows the battery status when you

complete the 2-minute brushing session, when you pause

the toothbrush, or while it is charging.

Note: It can take up to 24 hours to fully charge the

battery before first use, but you can use the Philips

Sonicare toothbrush before it is fully charged.

Charging on charger or UV Sanitizer

1 Plug the charger or sanitizer into an electrical outlet.

2 Place the handle on the charger or sanitizer.

The handle emits 2 short beeps to confirm that the

handle is placed properly.

The flashing light of the battery indicator shows that

the toothbrush is charging.

When the handle is fully charged on the charger, the

battery indicator lights up green for 30 seconds and

then switches off.