Publicidad
Idiomas disponibles
Idiomas disponibles
POWER
Turn the adjustment knob to select 16 "High" or 13 "Low"
and press
to confirm.
3. SET THE TIME
After selecting the power, you will need to set the
current time: The two digits for the hour will flash on
the display.
CLOCK
Press
or
to set the corrent hour and press
two digits for the minutes will flash on the display.
DAILY USE
1. SELECT A FUNCTION
Press
to switch on the oven: the display will show
the last running main function or the main menu.
The functions can be selected by pressing the icon for
one of the main functions or by scrolling through a
menu: To select an item from a menu (the display will
show the first available item), press
desired one, then press
2. SET THE FUNCTION
After having selected the function you require, you can
change its settings. The display will show the settings
that can be changed in sequence. Pressing
you to change the previous setting again.
TEMPERATURE / GRILL LEVEL / STEAM LEVEL
TEMPERATURE
When the value flashes on the display, press
change it, then press
the settings that follow (if possible).
In the same way, it is possible to set the grill level: There
are three defined power levels for grilling: 3 (high), 2
(mid), 1 (low).
In "Forced Air + Steam" function, you can select the
amount of steam from the following values: 1 (Low), 2
(Mid), 3 (High).
Please note: Once the function has been activated, the
temperature/grill level can be changed using
DURATION
DURATION
When the
icon flashes on the display, press
to set the cooking time you require and then press
confirm. You do not have to set the cooking time if you
4
or
to select the
to confirm.
allows
to confirm and continue with
or
Press
or
Please note: You may need to set the time again following
lengthy power outages. Select "CLOCK" in "SETTINGS" menu,
available by pressing
4. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal.
Before starting to cook food, we therefore recommend
heating the oven with it empty in order to remove any
possible odours. Remove any protective cardboard
or transparent film from the oven and remove any
accessories from inside it. Heat the oven to 200 °C
for around one hour, ideally using a function with air
circulation (e.g. "Forced Air" or "Convection Bake").
: The
Please note: It is advisable to air the room after using the
appliance for the first time.
want to manage cooking manually (untimed): Press
or
to confirm and start the function. By selecting this
mode, you cannot program a delayed start.
Please note: You can adjust the cooking time that has been
set during cooking by pressing
and then press
END TIME (START DELAY)
In many functions, once you have set a cooking time
you can delay starting the function by programming its
end time. The display shows the end time while the
icon flashes.
END TIME
Press
or
then press
the food in the oven and close the door: The function
will start automatically after the period of time that has
or
to
been calculated in order for cooking to finish at the time
you have set.
Please note: Programming a delayed cooking start time will
disable the oven preheating phase: The oven will reach the
temperature your require gradually, meaning that cooking
times will be slightly longer than those listed in the cooking
table. During the waiting time, you can press
amend the programmed end time or press
other settings. By pressing
information, it is possible to switch between end time and
.
duration.
. 6
SENSE
th
These functions automatically select the best cooking
mode, temperature and duration to cook, roast or bake
all the dishes available.
When required, simply indicate the characteristic of
or
food to obtain an optimal result.
to
to set the minutes and press
: press
to confirm.
to set the time you want cooking to end,
to confirm and activate the function. Place
, in order to visualize
to confirm.
or
to amend it
or
to
to change
Publicidad
