Descargar Imprimir esta página

Whirlpool W6 OS4 4S1 H BL Guía Rápida página 7

Ocultar thumbs Ver también para W6 OS4 4S1 H BL:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

The descaling procedure can also be performed whenever
the user desires a deeper cleaning of the tank and the internal
steam circuit.
The average duration of the full function is around 180
minutes. Once the function is started, follow all the
steps indicated on the display.
Please note: The function can be paused but, if it is canceled
at any time, the entire descaling cycle must be repeated from
the beginning.
»
PHASE 1: DRAINING (up to 3 min.)
When the display will show <PLACE A CONTAINER
UNDER NOZZLE>, please proceed with the draining task
as described in the dedicated Drain paragraph.
Please note: to ensure that the water is cold, it is not possible
to perform this activity before 4 hours have elapsed from the
last cycle (or the last time the product was powered). During
this waiting time, the display will show the following feedback
"WATER IS HOT - PLEASE WAIT".
The jug must be at least 2 liters large.
PHASE 2: DESCALING (~120 MIN.)
»
When display will show <ADD 1.7 L OF SOLUTION>,
please pour the descaling solution in the drawer. We
recommend to prepare the descaling solution adding
3 sachets (corresponding to 75g) of the specific Oven
WPRO* descaler in 1,7 liters of drinking water at
ambient temperature.
1
1,7 Liters
Once the descaling solution is poured inside the drawer,
press
to start the main descaling process. The
descaling phases do not need you to stay in front of the
appliance. After each phase is completed, an acoustical
feedback will be played and the display will show
instructions to proceed with the next phase.
» PHASE 3: DRAINING (up to 3 min.)
When the display will show < PLACE A CONTAINER
UNDER NOZZLE >, please proceed with the draining task
as described in the dedicated Drain paragraph.
PHASE 4: RINSING (~20 min.)
»
To clean the tank and the steam circuit, rinse cycle has
to be done.
When the display shows <ADD WATER TO RINSE>,
please pour drinking water in the drawer, until the
display shows "TANK FULL", then press
first rinsing.
» PHASE 5: DRAINING (up to 3 min.)
» PHASE 6: RINSING (~20 min.)
» PHASE 7: DRAINING (up to 3 min.)
= 75 g
+
2
+
3
to start the
»
PHASE 8: RINSING (~20 min.)
» PHASE 9: DRAINING (up to 3 min.)
After the last draining operation press OK to complete
the descale.
When Descale procedure is completed, it will be
possible to use all the steam functions.
*WPRO descaler is the suggested professional product for the
maintenance of the best performance of your steam function
in the oven. Please follow the instructions for use on the
packaging. For orders and information contact the after sales
service or www.whirlpool.eu
Whirlpool will not be held responsible for any damage caused
by the use of other cleaning products available on the market.
. MINUTEMINDER
When the oven is switched off, the display can be used
as a timer. To activate this function, make sure that the
oven is switched off and press
flash on the display.
Press
or
to set the length of time you require and
then press
to activate the timer.
MINUTE-MINDER
An audible signal will sound and the display will
indicate once the minuteminder has finished counting
down the selected time.
Please note: The minuteminder does not activate any of the
cooking cycles. Press
or
timer; press
or
to switch the timer off at any time.
Once the minuteminder has been activated, you can
also select and activate a function.
Press
to switch on the oven and then select the
function you require.
Once the function has started, the timer will continue to
count down independently without interfering with the
function itself.
Please note: During this phase, it isn't possible to see the
minuteminder (only the
continue counting down in background. To retrieve the
minuteminder screen press
currently active.
. KEYLOCK
To lock the keypad, press and hold
seconds. Do this again to unlock the keypad.
KEYLOCK
Please note: This function can also be activated during
cooking. For safety reasons, the oven can be switched off at
any time by pressing
.
or
: The
icon will
to change the time set on the
icon will be displayed), that will
to stop the function that is
for at least five
EN
7

Publicidad

loading

Este manual también es adecuado para:

W6 os4 4s1 h