39.
WASHING TIMES
The washing cycle consists of 3 separate phases:
•
Wash
variable time
•
Pause
5 sec.
•
Rinse
14 sec.
The time for the washing cycle is factory set at 160 sec.The complete cycle will last a total of:
washing
160 sec.
The next table gives the possible configurations by suitably wiring the inputs "J6-1 e J6-2".
These configurations are to be done by qualified personnel, trained and responsible for the modification.
A device extends the duration of the cycle if the water in the boiler has not reached the minimum temperature to perform
the rinse correctly.
40.
WASHING CYCLE
A macchina pronta si può iniziare l'utilizzo:
Open the door
•
Insert the basket with the dirty dishes.
•
•
Close the door and push START button
AUTOMATIC CYCLE
To activate the automatic start function, just press simultaneously the buttons Drain pump and Start for more than 5
seconds until the Start indicator lamp has a continuos light and then release the buttons:
the machine is ready to perform the start of the next cycle simply by opening and closing the door. To start a new cycle
wait at least 3 seconds between the opening and the closing of the door.
To return to manual cycle, just press the Start and Drain pump
buttons for more than 5 seconds until the Start indicator lamp
flashes and then release the button.
pag. 24
Pause
5 sec.
Total
J6-1
duration
90"
OFF
120"
OFF
180"
ON
360"
ON
Rinsing
15 sec.
J6-2
ON
OFF
OFF
ON
DOC. W010211 – REV.4
TOTAL
180 sec.