INTRODUCTION
Congratulations on your purchase of the SWR Power 750! You now own one of the meanest, toughest and loudest power amps ever made specifi-
cally for bass guitar.
Bassists have a unique burden when it comes to power, because it takes considerably more power to amplify lower frequencies than it does for
higher ones. That's why your guitarist can blow people away with his 100 watt combo amp, and you can't even leave the house with less than 200
watts if you want to be heard at all in a high-volume situation. Our loyal customer base has been telling us for years that they wanted a really sim-
ple, really loud bass amp. We responded in 1999 with the Bass 750, a black-and-chrome mono beast with a stripped-down EQ and power for days-
750 watts into 4 ohms.
So the Power 750 is a natural extension of the idea that spawned the Bass 750. Make it simple, turn it up, scare the neighbors. There's no switch-
ing power supply or digital anything inside. It's all true solid-state power, immediately available at the touch of your finger to the string. The noise
and power specifications are exacting, in most cases similar to (or better than) our Stereo 800 power amp, a Bass Player Magazine award-winner
for both Best Buy and Top Tone categories. The design is based on the original power amp circuit of SWR founder Steve W. Rabe, and as always,
every SWR Power 750 is handmade and individually tested in the United States.
We truly hope that your purchase of the SWR Power 750 helps bring out the best in your playing and adds to your enjoyment of music. To that
end, we ask that you read this Owner's Manual carefully and thoroughly so that you can fully realize the potential of your new Power 750. After all,
with more than a full "one horsepower" (one HP = 746 watts) behind you, you'd better know what you're doing before you do it.
FRONT PANEL FEATURES
• Rack Handles
• Volume Control
• Four Segment LED Dot-Bar Display
• Speaker On/Off Switch
• Power On/Off Switch
REAR PANEL FEATURES
• Unbalanced (1/4") Input Jack
• Balanced (XLR) Input Jack
• Ground/Lift Switch (for Balanced XLR Input Jack)
• Slave Output Jack
• Fan On/Off Switch
• Two 1/4" Speaker Output Jacks
• Two Speakon Speaker Output Jacks
• One Speaker Fuse (3AG, 10 amp fast-blo)
• One Line Fuse
• AC Power Cord Receptacle
POWER 750 SPECIFICATIONS
The Power 750 Power Amplifier from SWR is a high quality, all purpose power amplifier. It uses a discreet power supply, quasi-complementary
power amp design utilizing SIX 15 amp, 250 volt bi-polar NPN devices direct coupled to the output via an in-line speaker fuse.
Note:
All measurements were taken with a line voltage of 120VAC. All noise specifications are "unweighted." All voltages and watts are "RMS."
POWER OUTPUT:
750 Watts @ 4 ohms
6 • POWER 750