Safety Messages to Operators of Warning Light Equipment
•
The holding power of magnetic mounting systems is dependent upon
surface finish, surface flatness, and thickness of the steel mounting
surface. Therefore, to promote proper magnetic mounting:
•
Keep surface and magnets clean, dry, and free of foreign
particles that prevent good surface contact.
•
Ensure that the mounting surface is flat.
•
Do not use a magnetic mounting system on vehicles with vinyl
tops.
Failure to follow these precautions may result in property damage, serious
injury, or death.
RETAIN AND REFER TO THESE MESSAGES
Installation, Operation, and Maintenance Instructions
Federal Signal www.fedsig.com
9