Publicidad
Idiomas disponibles
Idiomas disponibles
Routine Maintenance
Dust Bin
* Clean after each use
1. Open the robot cover and press the dust bin clip to remove the dust bin.
2. Open the bin cover and empty the bin as shown in the diagram.
Filter
1. Remove the filter and tap its basket gently.
Note: Do not attempt to clean the filter with brushes or fingers.
2. Rinse the dust bin and filter under the running water and dry them
completely before re-installing.
Note:
· Rinse the dust bin and filter with clean water only. Do not use any detergent.
· Only use the dust bin and filter when whey are completely dry.
· The filter is recommended to be cleaned every two weeks and replaced every
three months.
EN
15
Publicidad
