Kärcher G 3000 OH Manual De Instrucciones página 13

TROUBLESHOOTING – continued
Garden hose connection leaks.
• Loose fittings.
- Tighten fittings.
• Missing/worn rubber washer.
- Insert new washer.
Spray wand leaks.
• Spray wand not properly attached.
- Attach the wand to the spray gun.
Turn the wand collar clockwise onto
the gun threads until tight.
• Broken o-ring.
- Call Kärcher customer service hotline
and order an o-ring.
Pump is noisy.
• Pump is sucking air.
- Check that hoses and fittings are air
tight. Turn off machine and
purgepump by squeezing trigger gun
until a steady flow of water emerges
through the nozzle.
Water leaks from pump.
• Loose fittings.
- Check that all fittings are tight.
• Water seals are damaged or worn.
- Call customer service.
• Thermal protection device is
activated.
- Thermal protection device will auto
reset. Do not run pump for more than
5 minutes without spraying.
Oil Drip.
• Oil seals are damaged or worn.
Call customer service.
If you encounter any additional
difficulties not listed, please call our
customer support for help.
All manuals and user guides at all-guides.com
WARRANTY USA
WARRANTY CDN
two years
Kärcher Customer Support USA
Call: 1-800-537-4129 for help
or visit our website:
www.karcher-usa.com
Kärcher Customer Service CDN
Call: 1-800-465-4980 for help
or visit our website:
www.karcher.ca
13
3 months